Palisade with negative fillet

Pieces

Palisade with negative fillet

Lasts a lifetime, is 65 percent lighter than concrete, and can be worked like hardwood

65% lighter than concrete

Weathering and rot-proof, no blooming

Good for the environment – 100% recycled plastic

Solid profile

No adhesion of algae or moss

Made in Germany

Available sizes

Diameter	Required running meters	Length	Weight
11 cm	10.4 units	40 cm	2.8 kg
11 cm	10.4 units	60 cm	4.4 kg
13 cm	8.6 units	60 cm	6.0 kg
		100 cm	10.2 kg
		150 cm	15.5 kg
16 cm	7.1 units	60 cm	8.8 kg
		100 cm	14.8 kg
		150 cm	22.9 kg

All size are available in brown and gray.

Download data sheet
(PDF 0,3 MB)

CABKA palisades are made of 100% recycled plastic. They are tested according to the “toy standard” DIN EN 71-3 and are 100% recyclable. CABKA palisades are much more durable than wooden palisades and do not require chemical preservation. An all-around ecological solution for garden design.

	Ø 11 cm		Ø 13 cm			Ø 16 cm
Length [mm]	40	60	60	100	150	60	100	150
Pallet with	40 units	60 units	60 units	100 units	150 units	60 units	100 units	150 units
Dimensions [mm]	1200 x 800 x 1750	1200 x 800 x 1750	1200 x 800 x 1650	1200 x 800 x 1350	1500 x 800 x 1400	1200 x 800 x 1650	1200 x 800 x 1650	1500 x 800 x 1400
Weight [kg]	860	1080	880	1090	1010	900	980	1030
Units/truckload	8400	5280	3861	2310	1536	2600	1560	1012

Installation and processing instructions

CABKA palisades weigh far less than concrete palisades. Therefore, they do not require additional equipment to install. Rotating into the negative fillet allows for easy alignment. Curves and corners are easy to create. CABKA palisades must be backfilled with sufficient compression of the fill material. Ensure that each palisade is perpendicular when setting.

Garden bed border with decorative flair

If palisades are freestanding, they must be installed with 1/3 of their length below ground. Only then can the required hold be ensured. For stability, the palisades should be set in a wet concrete bed of approx. 5 cm. The sides of the palisades should then be compressed with earth once the concrete dries.

Edging with natural filling

To ensure an ideal hold when installing palisades in this fashion, it is necessary to set the palisades in a wet concrete bed of up to 5 cm below the lawn edge.

Retaining wall function

Fillet palisades are suitable for retaining rising embankments. In extreme load situations, a steel-reinforced and frostproof retaining wall can be used for additional support of the row of palisades. Consult an architect in special cases. A drainage course must be built behind the retaining wall for draining surface water.