Palisade with negative fillet

Pieces

Palisade with negative fillet

Lasts a lifetime, is 65 percent lighter than concrete, and can be worked like hardwood

65% lighter than concrete

Weathering and rot-proof, no blooming

Good for the environment – 100% recycled plastic

Solid profile

No adhesion of algae or moss

Made in Germany

Available sizes


Diameter Required running meters Length Weight
11 cm 10.4 units 40 cm 2.8 kg
60 cm 4.4 kg
13 cm 8.6 units 60 cm 6.0 kg
100 cm 10.2 kg
150 cm 15.5 kg
16 cm 7.1 units 60 cm 8.8 kg
100 cm 14.8 kg
150 cm 22.9 kg

All size are available in brown and gray.


CABKA palisades are made of 100% recycled plastic. They are tested according to the “toy standard” DIN EN 71-3 and are 100% recyclable. CABKA palisades are much more durable than wooden palisades and do not require chemical preservation. An all-around ecological solution for garden design.




Ø 11 cm Ø 13 cm Ø 16 cm
Length [mm] 40 60 60 100 150 60 100 150
Pallet with 40 units 60 units 60 units 100 units 150 units 60 units 100 units 150 units
Dimensions [mm] 1200 x 800 x 1750 1200 x 800 x 1750 1200 x 800 x 1650 1200 x 800 x 1350 1500 x 800 x 1400 1200 x 800 x 1650 1200 x 800 x 1650 1500 x 800 x 1400
Weight [kg] 860 1080 880 1090 1010 900 980 1030
Units/truckload 8400 5280 3861 2310 1536 2600 1560 1012

Installation and processing instructions


CABKA palisades weigh far less than concrete palisades. Therefore, they do not require additional equipment to install. Rotating into the negative fillet allows for easy alignment. Curves and corners are easy to create. CABKA palisades must be backfilled with sufficient compression of the fill material. Ensure that each palisade is perpendicular when setting.

Garden bed border with decorative flair

If palisades are freestanding, they must be installed with 1/3 of their length below ground. Only then can the required hold be ensured. For stability, the palisades should be set in a wet concrete bed of approx. 5 cm. The sides of the palisades should then be compressed with earth once the concrete dries.

Edging with natural filling

To ensure an ideal hold when installing palisades in this fashion, it is necessary to set the palisades in a wet concrete bed of up to 5 cm below the lawn edge.

Retaining wall function

Fillet palisades are suitable for retaining rising embankments. In extreme load situations, a steel-reinforced and frostproof retaining wall can be used for additional support of the row of palisades. Consult an architect in special cases. A drainage course must be built behind the retaining wall for draining surface water.